Metal Roofing in Broward County, FL
Standing seam, nailstrip, and aluminum metal roofs installed to Broward County HVHZ code and rated for 170+ MPH wind. Florida State License CCC1332459.
Why Broward County Homeowners Are Switching to Metal
Broward County's hurricane wind zone, salt air, and 12-month cooling season punish traditional shingle roofs. A mechanically seamed standing seam metal roof solves all three problems in one system — 170+ MPH wind rating, corrosion-resistant Galvalume or aluminum substrate, and reflective Kynar 500 finishes that cut attic temperatures by up to 30°F.
M&M Roofing installs every metal roof to Broward County HVHZ code using Miami-Dade NOA-approved panels, peel-and-stick underlayment, and stainless steel or coated fasteners rated for coastal exposure. See our best metal roof for Broward County guide or compare systems in our mechanical seam vs nailstrip guide.
6 Benefits of a Metal Roof in Broward County
170+ MPH Wind Rating
Mechanically seamed standing seam panels exceed Broward County HVHZ requirements and carry Miami-Dade Notice of Acceptance.
40–60+ Year Lifespan
2–3× the life of an asphalt shingle roof. Most metal roofs outlast the home's mortgage.
Lower Cooling Bills
Reflective Kynar 500 finishes cut attic temperatures by up to 30°F, lowering AC bills across South Florida's long cooling season.
Insurance Discounts
Homeowners typically see 15–30% off the wind portion of their premium after a wind-mitigation credit.
Fire & Impact Class 4
Class A fire rating and Class 4 impact (UL 2218) — the highest impact rating available.
Manufacturer Warranties
Up to 50-year material and finish warranties from Drexel Metals, McElroy, and Englert.
Metal Roof Systems We Install
Mechanically Seamed Standing Seam
The gold standard for Broward County. 24-gauge steel, concealed clips, and a 180° double-lock seam that will not leak. Recommended for coastal, high-wind, and estate homes.
Learn moreSnap-Lock Standing Seam
A cost-effective standing seam option for inland Broward homes. Concealed fasteners with a factory snap-together seam.
Learn moreNailstrip / Exposed-Fastener Panels
The most affordable metal roof option — 26-gauge panels with exposed fasteners. Great value for budget-conscious inland homes.
Learn moreAluminum Standing Seam
Corrosion-proof aluminum panels engineered for coastal salt air — ideal for Fort Lauderdale, Pompano Beach, and Hollywood beachside properties.
Learn moreReady for a Metal Roof Quote?
Free on-site inspection and itemized quote — usually within one business day.
Call (754) 714-8445Metal Roof Cost in Broward County
Real 2026 price ranges for a typical 2,000 sq ft Broward County home. Every quote is free and itemized.
| System | Cost Range | Wind Rating | Lifespan |
|---|---|---|---|
| Nailstrip Metal | $18,000–$32,000 | 150 MPH | 30–40 yrs |
| Snap-Lock Standing Seam | $22,000–$38,000 | 160 MPH | 40–50 yrs |
| Mechanically Seamed | $28,000–$55,000 | 170+ MPH | 50–60 yrs |
| Aluminum Standing Seam | $32,000–$60,000 | 170+ MPH | 50+ yrs (coastal) |
For a full cost breakdown across shingle, tile, and metal, see our Broward County roof replacement cost guide.
Broward County Cities We Serve
Metal Roofing FAQs
How much does a metal roof cost in Broward County?
Most Broward County metal roofs run $22,000–$55,000 for standing seam and $18,000–$40,000 for exposed-fastener panels on a typical 2,000 sq ft home. Complex roof lines, tile removal, and estate homes can push $60,000–$90,000+. Every quote is free and itemized.
How long does a metal roof last in South Florida?
A mechanically seamed standing seam metal roof installed to Broward County HVHZ code typically lasts 40–60+ years — 2–3× longer than shingle. See our full lifespan breakdown in our roof lifespan guide.
Are metal roofs hurricane-rated for Broward County?
Yes. The mechanically seamed standing seam systems we install carry Miami-Dade NOA approval and are rated for 170+ MPH wind — well above the Broward County HVHZ 175 MPH design requirement.
Will a metal roof lower my home insurance in Broward County?
Most Florida insurers offer meaningful wind-mitigation discounts for HVHZ-rated metal roofs. Homeowners typically see 15–30% off their wind portion after a re-roof. Ask your carrier for a wind-mitigation credit form and we'll fill in the roof details.
Is a metal roof loud in the rain?
No. Installed over solid decking with peel-and-stick underlayment (as required by Broward County code), a modern metal roof is no louder than a shingle roof — often quieter than a tile roof.
How long does a metal roof installation take?
Most 2,000–3,000 sq ft Broward County metal re-roofs are completed in 4–7 working days once permits are pulled. Larger tile-to-metal conversions can take 10–14 days.
Get a Free Metal Roof Estimate
Licensed, insured, and Broward County HVHZ-code certified.