You have a leak or visible damage
Start with diagnosis and a repairability assessment before assuming the entire roof must be replaced.
Explore roof repair
Licensed Florida Roofing Contractor CCC1332459
Roofing Services for South Florida Properties
Start with the roofing need, then choose the system. M&M Roofing connects residential and commercial inspection, repair, replacement, materials, permitting, and project details in one clear path.
- Licensed & insured
- Florida License CCC1332459
- Free, no-obligation estimates
- Serving South Florida
Free Roofing Estimate
Request Your Free Roofing Estimate
Tell us what your property needs and we will contact you about the next step.
Complete Roofing Service Pages
Each guide explains the decisions, roof details, process, and limits that matter for that specific service.
Roof Replacement
A complete, documented reroofing plan for South Florida homes, from roof-deck assessment through required inspection planning.
View roof replacementTile Roofing
Concrete and clay tile systems planned around profile, attachment, underlayment, flashing, roof geometry, and community requirements.
View tile roofingMetal Roofing
Standing-seam and exposed-fastener metal systems selected by roof slope, exposure, panel approval, attachment, finish, and maintenance goals.
View metal roofingShingle Roofing
Architectural shingle systems with the underlayment, fastening, flashing, ventilation, and edge details treated as one roof assembly.
View shingle roofingFlat Roofing
Low-slope roof assemblies designed around drainage, insulation, penetrations, parapets, edge conditions, and steep-slope transitions.
View flat roofingRoof Repair
Diagnosis-led repairs for leaks, damaged roofing, flashings, penetrations, and transitions across tile, metal, shingle, and low-slope roofs.
View roof repairRoof Inspections
Condition-focused roof assessments that document visible materials, details, concerns, and practical next steps for homeowners.
View roof inspectionsCommercial Roofing
Commercial roof repair and replacement planning for low-slope, metal, and mixed-roof properties across South Florida.
View commercial roofingChoose a Starting Point
You need to understand roof condition
Use a condition-focused inspection to organize visible findings, limitations, and practical next steps.
Explore roof inspectionsYou are planning a complete new system
Compare tile, metal, shingle, and low-slope assemblies with the deck, details, approvals, and property in mind.
Explore roof replacementCompare Roof-System Families
Material is one decision. Underlayment, attachment, flashing, ventilation, drainage, edges, penetrations, product approvals, and property conditions complete the system.
Tile roofing
Concrete and clay profiles with underlayment, attachment, flashing, accessory, availability, weight, and HOA considerations.
Compare detailsMetal roofing
Mechanically seamed, snap-lock, nailstrip, and exposed-fastener panels compared by roof design, exposure, finish, and maintenance.
Compare detailsShingle roofing
Architectural shingles installed as part of a complete system that includes underlayment, starter, ridge, ventilation, and flashing.
Compare detailsFlat and low-slope roofing
Approved membrane assemblies planned around drainage, insulation, penetrations, parapets, edges, and steep-roof transitions.
Compare detailsLocal Service Guides
We expand these guides selectively—not by mass-producing every possible service and city combination. Each page addresses distinct property, roof-system, and planning considerations.
Roof Replacement
Service guideRoof Replacement in Fort LauderdaleM&M Roofing plans Fort Lauderdale reroofing projects around the home's roof shape, neighborhood exposure, approved assembly, access, and permitting—not only the surface material.Roof Replacement in Deerfield BeachFrom beachside exposure to inland neighborhoods west of I-95, Deerfield Beach homes need reroofing decisions grounded in the property's actual roof and environment.Roof Replacement in Pembroke PinesA Pembroke Pines roof replacement should begin with the individual roof, current product choices, permit documents, and any separate community requirements.
Tile Roofing
Service guideTile Roofing in Coral SpringsM&M Roofing helps Coral Springs homeowners coordinate tile profile, color, underlayment, attachment, flashing, product availability, and community review as one project.Tile Roofing in ParklandSome Parkland homes combine large roof areas, complex elevations, detailed finishes, and community standards. The tile plan should start with the individual property.Tile Roofing in WestonM&M Roofing helps Weston homeowners align community appearance requirements with a complete tile assembly designed for the individual roof.
Metal Roofing
Service guideMetal Roofing in Fort LauderdaleFort Lauderdale metal roofs must balance architecture, coastal exposure, panel approval, roof slope, seam design, flashings, and long-term maintenance.Metal Roofing in Pompano BeachPompano Beach homeowners need a metal roof system selected for the property's distance from salt water, roof geometry, approved panel configuration, and maintenance plan.Metal Roofing in Southwest RanchesSome Southwest Ranches properties pair large lots with broad or complex roofs. Metal planning should account for panel choice, access, staging, and detailing across the actual property.
Shingle Roofing
Service guideShingle Roofing in Coral SpringsA Coral Springs shingle project should begin with address-specific material eligibility, then move to the approved roof assembly, ventilation, flashing, and installation details.Shingle Roofing in Cooper CityCooper City shingle roofing should coordinate the visible selection with the deck, ventilation, perimeter attachment, valleys, walls, and connected roof sections.Shingle Roofing in SunriseA Sunrise shingle proposal should respond to the individual roof's history, shape, ventilation, connected additions, and current approved-system requirements.
Flat Roofing
Service guideFlat Roofing in Pembroke PinesFlat and low-slope roof work in Pembroke Pines starts with drainage, substrate, connected roof sections, access, and a clearly defined property responsibility.Flat Roofing in Fort LauderdaleFort Lauderdale low-slope roofs require coordinated drainage, wall flashing, equipment, coastal accessory details, and transitions to every connected roof area.Flat Roofing in Hallandale BeachHallandale Beach flat roofing should account for coastal accessory exposure, compact-site logistics, drainage outlets, walls, equipment, and shared roof conditions.
Roof Repair
Service guideRoof Repair in Deerfield BeachDeerfield Beach roof repair should trace the water path, evaluate the surrounding assembly, and account for coastal or inland exposure before defining a patch.Roof Repair in Pompano BeachPompano Beach roof repair requires source tracing across the visible roof, walls, equipment, drainage, and connected assemblies—not a sealant-only response.Roof Repair in DavieDavie roof repair may involve a main house, addition, garage, detached structure, tree exposure, or several roof materials that must be assessed separately.
Roof Inspections
Service guideRoof Inspections in PlantationA Plantation roof assessment should begin with a defined purpose and produce clear, limited findings about the accessible roof conditions reviewed.Roof Inspections in MargateMargate roof inspections should clearly define the property type, included roof areas, access, purpose, and limits before condition findings are discussed.Roof Inspections in Oakland ParkAn Oakland Park roof assessment should map additions, mixed slopes, walls, penetrations, drainage, and available records around one clearly defined purpose.
Commercial Roofing
Service guideCommercial Roofing in Fort LauderdaleFort Lauderdale commercial roofing should connect the approved roof assembly with drainage, rooftop equipment, coastal exposure, site access, and the building's daily operations.Commercial Roofing in Pompano BeachPompano Beach commercial roof work should be planned around the existing assembly, wind pressures, insulation, moisture, equipment, staging, fire access, and occupied-property needs.Commercial Roofing in Deerfield BeachDeerfield Beach commercial roofing should begin with the existing roof system, building operations, coastal or inland exposure, drainage, equipment, access, and current permit documents.
From First Assessment to Closeout
- 01
Assess
Review the property owner's concern, roof areas, visible conditions, known history, access, building use, and property-specific constraints.
- 02
Compare
Explain the feasible repair or replacement paths, complete assemblies, important tradeoffs, and any further investigation.
- 03
Document
Prepare a written scope with included work, selected materials, allowances, exclusions, and how changes will be authorized.
- 04
Coordinate
Confirm responsibility for required permits and inspections while planning product selections, access, delivery, protection, and scheduling.
- 05
Complete
Finish the approved scope, cleanup, applicable inspections, and any closeout records identified in the written proposal.
South Florida permitting note
Roofing permit and inspection requirements depend on the jurisdiction, property, and scope. Product approvals and installation instructions must match the proposed assembly. The written proposal should identify responsibility for required permits and inspections; any separate HOA architectural approval should begin early.
Roofing Services FAQs
Which roofing service should I choose if I am not sure what is wrong?
Start by describing the symptoms and known roof history. A condition assessment or repair visit can determine whether the issue appears localized, needs further investigation, or should lead to replacement planning.
Can M&M Roofing compare more than one roof material?
Yes. When the property supports multiple approved assemblies, we can explain tile, metal, shingle, and low-slope options. Roof design, deck, slope, exposure, HOA rules, availability, and budget may narrow the final choices.
Do roofing projects require permits?
Permit requirements depend on the work and jurisdiction. The written proposal should identify who coordinates required roofing permits and inspections. Any separate association approval remains its own property-owner or community process.
Are the city-specific pages separate roofing companies?
No. Every page describes service from M&M Roofing and Construction Corp. The city pages explain property, exposure, community, and planning differences while linking back to the same service and business.
Tell Us What Your Roof Needs
If you are unsure which service fits, describe the property and concern. We will help identify the right starting point.