Real Parkland Project
Barcelona 900 Concrete Tile Roof Replacement
See the completed Avalon Beach Blend roof and the documented #30 felt, Polystick TU MAX, and Polyset AH-160 system details.
View the Parkland tile case studyServing Parkland & Broward County
Parkland Roofing Contractor for Replacement & Repair
Repair or replace your tile, metal, shingle, or flat roof with a plan that accounts for community material approvals, Parkland's current permit package, and protection of your property during installation. M&M Roofing operates under Florida Certified Roofing Contractor license CCC1332459.
Free Roofing Estimate
Request a Parkland Roof Estimate
Tell us what is happening with the roof and where the property is located.
Florida State CertifiedHOA & City Permit PlanningProperty Protection PlanningFree Estimates
Make the Parkland roof approval-ready before ordering
A roof can satisfy the homeowner's goals, an association's appearance rules, and the City's technical review only when those requirements are identified early. The first estimate should map the entire roof and the approval path—not just price the visible surface material.
Community approval path
Determine whether an association controls roof material, profile, or color before a product is ordered. Parkland publishes HOA resources and identifies specific communities with approval prerequisites.
Complete roof map
Document every roof section, valley, transition, skylight, penetration, rooftop unit, drainage path, and visible deck concern so connected details are not treated as afterthoughts.
Permit-ready roof system
Match the covering, underlayment, attachment, NOAs or product approvals, flashing, edge details, and property-specific affidavits before the City review begins.
Roofing systems for Parkland properties
Compare the complete assembly, roof geometry, access, product documentation, and community requirements—not the covering alone.
Roof Repairs
Leak investigation around valleys, flashing, penetrations, broken materials, and transitions, followed by a repair scope based on the reachable source and surrounding roof condition.
View Parkland service detailsRoof Replacement
A complete reroof plan covering removal, visible deck conditions, approved underlayment and covering, roof details, permits, inspections, cleanup, and warranty documents.
View Parkland service detailsTile Roofing
Concrete and clay tile systems compared by profile, color, weight, attachment, underlayment, flashing, approved assembly, and community appearance rules when they apply.
View Parkland service detailsMetal Roofing
Standing-seam and other approved metal systems planned around slope, panel profile, gauge, seam, attachment, finish, penetrations, perimeter details, and Parkland's metal-roof documentation.
View Parkland service detailsShingle Roofing
Architectural shingle systems designed with compatible underlayment, starter, fastening, ridge, ventilation, edge metal, flashing, and product documentation for the selected assembly.
View Parkland service detailsFlat Roofing
Low-slope roofing for additions and connected roof areas, with attention to drainage, penetrations, perimeter details, insulation, and transitions into tile, metal, or shingle sections.
View Parkland service detailsWhat Parkland's roofing checklist asks for
The live City checklist should be used when the application is prepared. These current items show why the roof system and the paperwork need to be planned together.
Applications and current contractor records
Parkland's checklist calls for the Broward County Uniform Building Application, the Uniform Roofing Permit Application, and contractor records that are current in the City's system.
Roof assembly documentation
The permit package includes one set of NOAs or product approvals, plus the proposed roof covering, underlayment, attachment, flashing, edge, and other compatible assembly details.
Existing rooftop conditions
The checklist identifies a rooftop-equipment form, re-strap affidavit, renailing and secondary-water-barrier affidavit, and skylight approvals with design pressures when applicable.
Project-specific records
The current checklist also identifies the reroof owner notification, asbestos response, metal fire-directory listing, a recorded NOC over $5,000, and property-assessment documentation in the listed value situation.
Details that should be settled before submittal
- The selected material, profile, and color—including any association approval that applies.
- Skylights, rooftop equipment, solar equipment, and who is responsible for related removal or reinstallation.
- NOAs or approvals that match the covering, underlayment, attachment, flashing, and perimeter details.
- Access, staging, driveway or paver protection, landscaping, pool-area concerns, cleanup, and weather dry-in planning.
Official Parkland roofing resources
Forms, software instructions, and administrative requirements can change. Use the City's live sources for each permit.
Parkland now uses MGO—not the old Trakit system
The City says Central Square, also called Trakit, is no longer available. Contractors must create a My Government Online account, register in MGO, and provide current liability insurance, workers' compensation, and contractor-license records before continuing to submit permits or schedule inspections.
Use Parkland's current MGO upload naming conventionsKeep the contractor record current before submittalRequest inspections and review results through MGOUse ePermits OneStop for associated Broward approvals when applicable
When an HOA applies, two approvals can control one roof
An association may review appearance, while the City reviews the permitted technical assembly. Those are separate decisions, and neither should be assumed to replace the other.
Parkland's published subdivision information specifically says MiraLago requires HOA approval before permit submittal and Cypresshead requires an HOA approval letter. That does not mean every Parkland property has the same requirement.
A practical approval sequence
1. Check the property documents
Confirm whether a community review applies and what it controls.
2. Narrow the roof choices
Compare material, profile, finish, color, and complete system details within those requirements.
3. Obtain written approval when required
Resolve the association step before ordering material or relying on a final selection.
4. Match the City package
Submit technical documents for the exact roof assembly that is in the contracted scope.
Roof details that can change the Parkland scope
These items should be visible in the assessment, proposal, and permit planning when they exist on the property.
HVHZ assembly and dry-in
Deck attachment, secondary water barrier, underlayment, fastening, perimeter details, flashing, and the roof covering must be documented as a compatible assembly for the project.
Skylights, solar, and rooftop equipment
Identify penetrations and mounted equipment before work begins. The scope should state how each item, its flashing, removal or reinstallation, and any remaining warranty responsibility will be handled.
Roof-to-wall evaluation
Parkland's checklist identifies property-assessment records in the listed value situation and a re-strap affidavit. The actual retrofit path depends on the property, existing connections, applicable exceptions, and code limits—not one blanket rule for every home.
Access and property protection
Gate or vendor access, material staging, driveway and paver protection, landscaping, pool areas, debris movement, cleanup, and daily weather protection should be planned for the actual property instead of left implicit.
A clear Parkland roofing process
The order matters: assess the entire roof, identify approvals, compare systems, prepare the permit package, then build and close out the documented scope.
1. Inspect and map the roof
Review the covering, flashing, penetrations, valleys, transitions, drainage, rooftop equipment, visible deck concerns, prior repair areas, and property access conditions.
2. Identify approval requirements
Check whether an association approval applies and what it controls so the material, profile, finish, and color discussion begins with the right boundaries.
3. Compare complete roof systems
Compare repair or replacement paths and explain the covering, underlayment, attachment, flashing, ventilation, edges, and connected low-slope details in each proposed scope.
4. Prepare the permit package
Use current Parkland and Broward forms, MGO document naming, applicable affidavits, and product information that matches the contracted roof assembly.
5. Protect, install, and inspect
Coordinate access, staging, property protection, tear-off, dry-in, deck work, installation, cleanup, and the required inspections for the permitted scope.
6. Close out the project
Confirm the contracted work and inspections are complete, provide the applicable warranty information, and leave the property ready for normal use.
Repair or replacement: compare the whole roof
The recommendation should follow the leak source, surrounding materials, underlayment and flashing condition, prior work, and permit practicality—not a predetermined sales answer.
A focused repair may make sense when
- • The source is isolated and can be reached.
- • Surrounding materials remain serviceable.
- • Compatible repair materials are available.
- • The repair can be detailed as a durable assembly.
Replacement deserves comparison when
- • Leaks or failures appear in multiple areas.
- • Underlayment or flashing problems are widespread.
- • Prior repairs no longer provide a stable base.
- • A permitted repair cannot reasonably solve the system issue.
Check current and older Parkland permit records
Current permits and inspection activity are handled in MGO. Parkland also maintains an older document archive and a Records Retrieval Request form, so older roof history may require more than one search source.
Verify M&M Roofing's Florida license
Florida DBPR identifies Martin Mora Jr. and M&M Roofing and Construction Corp under Certified Roofing Contractor license CCC1332459. Florida certification authorizes roofing contracting statewide, while Parkland's MGO registration, permit, document, and inspection procedures still apply to each City project.
A documented M&M Roofing project in Parkland
Review the actual Parkland location, concrete tile, layered underlayment, and foam-attachment details from this completed project.
More documented South Florida roofing projects
Miramar tile-to-metal conversion
See the documented 24-gauge standing-seam system, Polystick XFR underlayment, and mechanically seamed panel details.
View case studyMiramar concrete tile replacement
Review the direct-to-deck tile underlayment, foam attachment, deck repairs, and installed concrete tile profile.
View case studyFort Lauderdale shingle and flat roof
See how the sloped shingle and hot-mop flat-roof sections were planned as connected but distinct assemblies.
View case studyParkland roofing questions
Does a Parkland roof replacement require a permit?
Yes. The City publishes a dedicated roofing checklist and permit package for reroof work. The current checklist calls for the Broward County Uniform Building Application, Uniform Roofing Permit Application, supporting roof documents, and applicable affidavits.
Does every Parkland roof need HOA approval?
No blanket statement applies to every property. If a home is governed by an association, its documents may control roof material, profile, or color. Parkland's current subdivision information specifically identifies MiraLago and Cypresshead as examples with HOA approval prerequisites.
What permit system does Parkland use now?
Parkland states that its former Central Square or Trakit system is no longer available and directs contractors and public users to My Government Online, or MGO. Contractors must register in MGO and keep their required license and insurance records current.
Is Parkland in the High-Velocity Hurricane Zone?
Yes. Parkland is in Broward County's High-Velocity Hurricane Zone. The useful comparison is the complete approved roof assembly, including the covering, underlayment, attachment, flashing, edge details, and applicable product approvals—not a broad marketing label by itself.
When does a Parkland reroof need a Notice of Commencement?
Parkland's current roofing checklist calls for a recorded and posted Notice of Commencement when the job value is over $5,000, before the first inspection. The live checklist should be rechecked when the permit is assembled.
What extra documents can a Parkland metal roof require?
In addition to the general roof package, Parkland's checklist specifically identifies a fire-directory listing for metal roofing. The selected panel, underlayment, attachment, flashing, edge details, and approvals must still work together as one permitted assembly.
What happens if the roof has skylights or rooftop equipment?
Those conditions should be identified before pricing and permitting. Parkland's checklist calls for a rooftop-equipment form and, when applicable, skylight product approvals and design pressures. Removal, reinstallation, flashing, and warranty responsibilities should be clear in the written scope.
Does every Parkland home require roof-to-wall work during a reroof?
No. Parkland's forms and checklist identify a property-value review and re-strap documentation in certain situations, but the actual requirement depends on the structure, assessed value, existing connections, applicable exceptions, and code limitations. It should be evaluated for the specific property.
How can I find an older Parkland roof permit?
Current permit and inspection activity is handled through MGO. Parkland also maintains an older document archive and provides a Records Retrieval Request form, so an older roof record may require the archive or a City records request rather than a single date-range search.
Is M&M Roofing licensed to work in Parkland?
Florida DBPR lists Martin Mora Jr. and M&M Roofing and Construction Corp under Certified Roofing Contractor license CCC1332459. Parkland's contractor-registration, permit, document, and inspection procedures still apply to each City project.
Helpful roofing resources
Nearby roofing service areas
Get a roof plan for your Parkland property
Tell us what is happening with your roof. M&M Roofing will contact you to arrange the next step, explain the available paths, and identify the City, roof-system, site, and community items that may apply.
“On-time, on-budget! Absolutely fantastic company;that exceeded all expectations!”