Project Snapshot
A Documented Miramar Tile-to-Metal Conversion
These photographs document the underlayment, panel installation, and completed roof on a real Miramar home. The public location is limited to the SW 24th Street area and ZIP code; the house number is not published.
- Location
- SW 24th Street area, Miramar, FL 33029
- Project type
- Residential tile-to-metal roof conversion
- Roof system
- 1.5-inch mechanically seamed standing seam
- Metal
- 24-gauge panels in Regal Blue
- Underlayment
- Polystick XFR
Installation Progress
Polystick XFR Beneath the Regal Blue Panels
Progress photographs show Polystick XFR underlayment across the roof deck while the new metal panels advanced over the home’s different roof sections.
The installation images also show the relationship between the underlayment and the 24-gauge Regal Blue panels before the completed roof covered those working areas.
Completed Miramar Project
Finished 1.5-Inch Mechanically Seamed Roof
The finished photographs show the standing-seam panels across the home’s intersecting roof planes, hips, valleys, and lower roof sections.
This case study records the project as installed: a tile-to-metal conversion using 24-gauge Regal Blue panels and Polystick XFR underlayment in Miramar, Florida.
Planning your own conversion? Browse metal roof colors and finishes and confirm your choice with a physical sample.
Real Project Photography
Regal Blue Standing Seam Roof Gallery
Additional views from installation through the completed roof. Every image is from this Miramar tile-to-metal project.
Miramar Metal Roof Project FAQs
What type of metal roof was installed on this Miramar home?
M&M Roofing installed a 1.5-inch mechanically seamed standing-seam metal roofing system.
What gauge and color metal were used?
The project used 24-gauge metal panels in the Regal Blue color selected for the home.
What underlayment was installed?
The metal roofing system was installed over Polystick XFR underlayment.
Did this project replace a tile roof?
Yes. This Miramar project changed the existing roof covering from tile to mechanically seamed standing-seam metal.
Where in Miramar was this roofing project completed?
The project is in the SW 24th Street area of Miramar, FL 33029. The house number is withheld for homeowner privacy.
Explore Related Roofing Information
Planning a similar conversion in Fort Lauderdale? Explore our metal roofing services in Fort Lauderdale for local guidance on panel selection, property conditions, and rooftop-equipment planning.
Budgeting for your own tile-to-metal conversion? See our standing seam metal roof cost guide for Broward County planning ranges. These are general examples, not the price of this Miramar project.