Completed roofing project · Coconut Creek
Dark Bronze Standing Seam Metal Roof in Coconut Creek, FL
We recently completed the roof on this Coconut Creek home using a 1½-inch mechanically seamed standing seam system in Dark Bronze, installed over Polystick XFR underlayment. See the finished roof and the work beneath the panels.
By M&M Roofing and Construction Corp · Published
Get Your Free Metal Roof Quote
Planning a roof in Coconut Creek? Tell us about your home and the metal roof you have in mind.
The completed project
Dark Bronze against a white exterior
The new roof brings a consistent finish to this home's upper rooflines and lower garage roof. Dark Bronze outlines the white walls and complements the brown garage door, while the raised panel seams give each roof section a defined pattern.
- Location
- Coconut Creek, Florida
- Roof system
- 1½-inch mechanically seamed standing seam
- Color
- Dark Bronze
- Underlayment
- Polyglass Polystick XFR
- Panel supplier
- Metal Alliance
- Fabricator
- Metal Ops
Comparing finishes for your own home? Explore our metal roof colors and use a physical sample to see how a finish looks beside your walls, trim and landscaping.
Materials and fabrication for this project
Beneath the metal
Polystick XFR before the panels cover it
This installation view shows the pink Polystick XFR layer across the roof, with its product markings still visible. Once the metal is installed, homeowners no longer see this part of the roof. The progress photos preserve a view of the materials underneath the finished surface.
Polyglass describes XFR as a self-adhered, fire-resistant waterproofing underlayment designed for high-temperature applications beneath metal roofing. It adds a water-protection layer beneath the roof covering. Read the manufacturer's product sheet (PDF, opens in a new tab).
Our Polystick XFR review explains the product in more detail. When comparing roof proposals, look for the named underlayment alongside the metal panel system.
Installation in progress
A 1½-inch mechanical seam in Dark Bronze
We sourced the panels for this project from Metal Alliance, with fabrication by Metal Ops. The progress photo shows a Dark Bronze panel beside the exposed Polystick XFR underlayment during installation.
This project used a 1½-inch mechanically seamed standing seam profile. Choosing a metal roof involves both its appearance and its panel system; our 1½-inch mechanical seam guide is a useful next step if you are comparing options.
For a similar project, visit our metal roofing services or learn more about roofing in Coconut Creek. An estimate gives you a written scope for your home and the materials you select.
Coconut Creek project FAQs
What type of metal roof was installed on this Coconut Creek home?
M&M Roofing installed a 1½-inch mechanically seamed standing seam metal roof. The 1½-inch dimension identifies the seam profile; it does not describe the thickness of the metal.
What color is the finished roof?
The roof is Dark Bronze. The completed photo shows its appearance against the home's white exterior and brown garage door. When choosing a finish for your home, compare a physical sample as well as project photographs.
What underlayment was used beneath the metal?
We installed Polyglass Polystick XFR beneath the metal roof. The two installation photos show that underlayment while work was in progress, before the remaining panels covered it.
Does M&M Roofing install metal roofs in Coconut Creek?
Yes. This completed project is an example of our work in Coconut Creek. Request a free estimate to discuss your existing roof, the standing seam profile and finish you prefer, and the scope of work for your property.
Plan your metal roof in Coconut Creek
Tell us about your home, your current roof and the finish you prefer. M&M Roofing can help you plan a standing seam roof and prepare a free estimate.
Call (754) 714-8445