Crown Tuscany: softer curves for a concrete tile roof
Compare Crown Tuscany colors, roof-tile weight and dimensions. Understand its current Miami-Dade NOA and the details that matter for a South Florida reroof.
By M&M Roofing and Construction Corp · Florida Certified Roofing Contractor CCC1332459 · Published · Updated
Get a free Tuscany roof estimate
Tell us about your roof. We can help compare the profile, color and complete installation scope.
The short answer
Crown Tuscany gives you the familiar curves of a tile roof with a softer, less pronounced shape than Sanibel. It’s a good option to compare if you like a traditional tile roof but want a more understated look. A physical sample can help you see how the color works with your home.

What makes Tuscany look different?
Curved without the tallest barrel
Tuscany creates a repeating rounded pattern with a softer rise. If you want a recognizable tile roof but find high barrel tile visually busy, put Tuscany beside Sanibel in your sample comparison. The roof’s pitch and your viewing angle will affect how prominent the curves appear.
A practical way to compare blends
A blend can look lively in a close-up image and more even across a whole roof. Start with the home’s fixed finishes—walls, stonework and driveway—then compare the sample outdoors. Choosing between gray, terracotta and brown should happen alongside the profile decision rather than after the installation scope is settled.
Check the exact product name on paperwork
The current Miami-Dade NOA calls Tuscany low profile. Another evaluation for installations outside the High-Velocity Hurricane Zone uses different profile terminology. For a Broward project, match the exact product and applicable approval instead of relying on the word ‘low’ or ‘high’ by itself.
Terminology sources: current Miami-Dade NOA, p. 2 (opens in a new tab) and outside-HVHZ evaluation, p. 1 (opens in a new tab).
Profile description: Crown’s Florida Tuscany page (opens in a new tab). The design considerations above are our guidance for comparing the look on your home.
16 Tuscany color choices to explore
These are the Tuscany choices in M&M’s researched Crown catalog. Each card identifies the manufacturer color and code. Compare a current physical sample outdoors before approving the final color; screens, lighting and production variation change what you see.
Everglades (ATSPC100) is omitted from this palette because Crown also lists it on its linked unavailable-products notice. Confirm its status directly before specifying it.

Mission Terracotta Range
ATSSC001

Burnt Terracotta
ATSSC002

Bougainvillea
ATSSC007

Manatee
ATSSC010

Sand Dollar
ATSSC011

Silverado
ATSSC012

Birchwood
ATSSC015

Smoked Fireclay
ATSSC016

Sequoia
ATSSC022

Tobacco Range
ATSSC026

Adobe Range
ATSSC035

Polar White
ATSPC101
Premium Color-Thru

San Antonio Blend
ATSCB302

Thunderstorm Blend
ATSCB312

Moonlight Gray Blend
ATSCB313

Grand Canyon Blend
ATSCB318
Images © Crown Roof Tiles. Original manufacturer references, checked October 20, 2026. A listed color is not a stock or physical-sample guarantee. Custom Blend does not by itself establish a premium price.
Choose your Crown samples →Tuscany dimensions, weight and coverage
A roofing square means 100 square feet of roof surface, not the floor area of the home. The nominal product figures below use a 3-inch headlap. They describe field tile; hips, ridges, accessories and the rest of the assembly are additional.
| Property | Published value | Source |
|---|---|---|
| Material | Concrete field tile | Manufacturer / NOA |
| Nominal overall size | 17 × 13 inches | Crown brochure, p. 21 |
| Nominal exposed size | 14 × 12 inches | Crown brochure, p. 21 |
| Headlap for listed coverage | 3 inches | Crown brochure, p. 21 |
| Field tiles per roofing square | Approximately 85 | Crown brochure, p. 21 |
| Nominal weight per field tile | 10.5 lb | Crown brochure, p. 21 |
| Nominal field-tile weight per square | 893 lb / 100 sq ft | Crown brochure, p. 21 |
| Overall profile height | 2.3 inches | NOA 25-0127.09, p. 2 |
Sources: May 2026 Crown Florida brochure, printed p. 21 (opens in a new tab); official Tuscany NOA, p. 2 (opens in a new tab).
Why you may see a different weight in another document
The nominal product information gives 10.5 lb per tile; the NOA uses W = 10.0 lbf in attachment calculations. The published 893 lb per square is rounded. Use the brochure for this planning illustration and the approval’s own values for its engineering calculations.
Compare Crown tile profiles
Switch between profile height and published tile-only weight. The highlighted row is Tuscany.
Sanibel
3.1 in.
TuscanyCurrent profile
2.3 in.
Windsor Slate
1.2 in.
Windsor Split Slate
1.2 in.
Windsor Shake
1.2 in.
View profile measurements as a table
| Profile | Height (in.) | Tile-only lb / 100 sq. ft. |
|---|---|---|
| Sanibel | 3.1 | 957 |
| TuscanyCurrent profile | 2.3 | 893 |
| Windsor Slate | 1.2 | 1,050 |
| Windsor Split Slate | 1.2 | 1,050 |
| Windsor Shake | 1.2 | 1,050 |
Height source: Sanibel NOA 24-1008.16 (opens in a new tab), Tuscany NOA 25-0127.09 (opens in a new tab) and Windsor NOA 25-0127.10 (opens in a new tab), each p. 2. Weight source: May 2026 brochure, p. 21 (opens in a new tab). These are geometry and nominal weight comparisons, not performance rankings.
Estimate Tuscany tile quantities
Use the measured sloped roof area, not the home's floor area. This illustration uses 85 tiles and 893 tile-only pounds per 100 square feet.
Enter 500–6,000 square feet in 100-square-foot steps.
Selected roof area: 2,000 sq. ft.
- Estimated field tiles
- 1,700
- Nominal tile-only weight
- 17,860 lb
How quantities change with roof area
Bars compare field-tile counts. Each row also lists nominal tile-only weight; the highlighted row marks your selected area.
1,000 sq. ft.
850 tiles · 8,930 lb
2,000 sq. ft.Selected area
1,700 tiles · 17,860 lb
3,000 sq. ft.
2,550 tiles · 26,790 lb
4,000 sq. ft.
3,400 tiles · 35,720 lb
View roof-area quantities as a table
| Roof area (sq. ft.) | Field tiles | Tile-only weight (lb) |
|---|---|---|
| 1,000 | 850 | 8,930 |
| 2,000Selected area | 1,700 | 17,860 |
| 3,000 | 2,550 | 26,790 |
| 4,000 | 3,400 | 35,720 |
Planning illustration only. Quantities exclude waste, cuts, breakage, hips, ridges and other accessories. Weight excludes underlayment, attachment materials, decking and other roof components. This is not a material order, structural assessment or roof-loading plan.
Calculation source: area ÷ 100 × Crown’s published 85 tiles or 893 lb per square. Tile counts round up to a whole piece; nominal weights use the published rounded weight per square. Final quantities require roof measurements, layout, cuts, waste and accessories.
What the Tuscany Miami-Dade NOA actually covers
Official approval reviewed · October 20, 2026
NOA 25-0127.09 (opens in a new tab)
- Approval date
- February 13, 2025
- Expiration shown
- January 29, 2030
- Manufacturing location
- Arcadia, Florida
- Product description
- Low-profile interlocking concrete roof tile
Scope: the named concrete tile on the specified wood-deck applications, subject to the complete NOA. Check the current county record (opens in a new tab) when preparing the permit.
Three things the installation review must connect
The roof beneath the tile
Confirm the deck, substrate and approved underlayment assembly. The tile’s NOA does not approve every waterproofing product that could be placed beneath it.
The attachment schedule
Mechanical fasteners, mortar and adhesive applications have different details. Fastener type, embedment, spacing, adhesive product and placement must match the selected approval.
The demand on this building
The required attachment depends on the building and roof zones. The professional preparing the roof design must compare demand with resistance on the same technical basis.
Read slope and attachment numbers in context
The reviewed NOA specifies a 4:12 minimum slope for mechanical attachment. Do not extend that statement to every installation method or treat a 2:12 row in a gravity-moment table as permission to install at that slope. For another attachment method, verify the applicable provisions and the complete approved system.
The NOA’s attachment calculations use a tile weight W of 10.0 lbf and method-specific moment values. A resisting moment in foot-pounds is not wind pressure in psf and is not a miles-per-hour rating. We have not assigned a universal wind-speed claim to Tuscany.
The Tuscany NOA says field uplift testing may be required under the applicable code. Confirm the project’s testing requirements with the selected attachment system and permitting authority. The NOA also states that it does not qualify the roof’s fire classification. Any installed-assembly fire claim needs its own applicable documentation.
Broward and Miami-Dade are in the High-Velocity Hurricane Zone. A Florida evaluation limited to areas outside that zone cannot stand in for the HVHZ documentation. Our guide to checking NOAs and Florida product approvals explains what to ask for.
Crown vs. Westlake · Foam attachment · Reviewed October 21, 2026
How does Tuscany compare with Villa 900?
These are the closest lower-curved profiles in the two Florida ranges. Both NOAs describe low-profile concrete tile. The comparison uses Crown’s Arcadia product and Westlake’s Lake Wales product.
What does “holds better” mean here?
Wind tries to lift and tip a tile. The numbers below describe how much turning force the listed attachment can resist. A higher number means greater resistance in that specific configuration. It does not measure just the glue’s bond to the waterproofing layer, or give the whole roof a wind-speed rating.
For this comparison, we use the published single-paddy entries for ICP’s two-part APOC Polyset AH-160, HFO1 formulation. A paddy is a measured patch of foam. Matching the formulation, paddy pattern and printed weight gives a more useful comparison than comparing unrelated maximum ratings.
Single-paddy AH-160 HFO1 entries · foot-pounds (ft-lbf) · all bars use the same 0–120 scale
Read these as table entries, not installation amounts. The 24 g row appears in the tile NOAs, while the adhesive NOA requires at least 30 g for its medium-paddy detail. The installer and roof designer must reconcile the full approvals before use.
24 g single-paddy entry in each tile NOA
- Crown Tuscany
- 46 ft-lbf
- Westlake Villa 900
- 46 ft-lbf
54 g single-paddy entry in each tile NOA
- Crown Tuscany
- 87 ft-lbf
- Westlake Villa 900
- 87 ft-lbf
Source rows: Crown 25-0127.09, p. 6, Table 7 (opens in a new tab); Westlake 26-0602.02, p. 6, Table 6 (opens in a new tab). These are published values; no interpolation or wind-speed conversion is used.
What this means for your choice
Tuscany and Villa 900 have the same published resistance in both matching single-paddy entries shown here. Choose the look you prefer, then have the attachment plan checked for your home; these figures alone do not favor either brand.
The underlayment still needs its own check
A roof’s attachment depends on the tile, foam, waterproofing layer and deck working together. These tile tables do not establish a Crown-versus-Westlake bond-strength figure on a named underlayment. Ask for the exact underlayment assembly and adhesive version in your roof’s approved attachment plan.
Technical notes: foam minimums, TU MAX and the complete approvals
The chart uses the HFO1 values in rows labeled HFC & HFO1. It does not substitute HFO2 or the separate, one-component RTA-1 adhesive. Paddy location and contact area still matter; these graphs are not an installation schedule.
AH-160 NOA 23-0614.01, pp. 5–6 (opens in a new tab) gives the component application rules, including a 30 g medium-paddy minimum and 12 g per paddy for its two-paddy detail. The lower weights printed in some tile tables must not be treated as dispensing instructions or silently relabeled with the component minimums.
For Polystick TU MAX, the compatibility table in Polyglass NOA 25-0121.12, p. 18 (opens in a new tab) expressly names AH-160 (HFC). It does not expressly list HFO1 or HFO2 there. Confirm documentation for the exact formulation and underlayment combination before treating this comparison as applicable to a TU MAX assembly.
Use the building’s roof-zone calculations and the full tile, adhesive and underlayment approvals together. A table value is neither a maximum wind speed nor a measurement taken on our Miramar project.
Miami-Dade County, Florida approvals reviewed October 21, 2026. Informational comparison, not a County endorsement. Check the current records and complete approval conditions for the proposed roof.
Tuscany or Sanibel?
Tuscany’s listed 2.3-inch height sits below Sanibel’s 3.1-inch height in their current NOAs. Crown’s approximate tile-only weight is also lower: 893 versus 957 lb per square. That does not remove the need to review the existing structure, and it is not a comparison of complete installed roof weight.
What to compare in the estimate—and after installation
A Tuscany tile price alone does not tell you the cost of a reroof. Ask what the proposal includes for tear-off, deck repairs, underlayment, flashings, attachment, tile and trim, loading, permits and cleanup. The roof’s complexity and access also affect the work. Our Broward tile roof cost guide explains the scope questions to compare.
Keep the approved profile, color code and installation paperwork with your roof records. If a tile breaks later, a similar color from another profile may not fit. Have leaks assessed as a roof-system issue: an intact-looking tile surface does not establish the condition of the underlayment or flashing below it.
Ask for the current written product warranty and installation warranty separately, including exclusions and maintenance requirements. Avoid choosing the product on an unsupported lifetime, maintenance-free or guaranteed insurance-savings claim. Review safe inspection and maintenance access with your roofer rather than walking the tile yourself.
Frequently asked questions
Is Tuscany a lightweight roof tile?
Do not treat it as a lightweight system based on a comparison with another concrete tile. Crown lists approximately 893 lb of field tile per roofing square. The deck, framing and complete reroof assembly still need evaluation for the property.
How does Tuscany compare with Westlake using APOC foam?
Tuscany and Villa 900 have the same published resistance in both matching single-paddy entries shown here. Choose the look you prefer, then have the attachment plan checked for your home; these figures alone do not favor either brand. This compares AH-160 HFO1 attachment moments from the tile NOAs, not isolated glue-to-underlayment bond strength. Table weights are not installation instructions.
What Miami-Dade approval covers Tuscany?
The reviewed document is NOA 25-0127.09, approved February 13, 2025 and expiring January 29, 2030. It covers the named Arcadia-manufactured tile for specified wood-deck applications. Check the current record and all limitations for the proposed roof before permitting.
How heavy is Tuscany?
Crown’s nominal Florida product information lists about 10.5 lb per field tile and 893 lb per 100 square feet at the stated coverage. This is tile-only weight, not the full roofing assembly or a structural capacity determination.
Can the tile go on a low-slope roof?
Do not decide from the tile’s name or a single row in a calculation table. The reviewed NOA specifies a 4:12 minimum for mechanical attachment. Other systems require their applicable installation and approval provisions to be checked. A 2:12 row in a gravity-moment table is not general permission for a 2:12 installation.
Does an NOA number mean the roof is rated for a particular wind speed?
No. An NOA describes an accepted product and specified applications. Attachment resistance must meet the design demand for the particular building and roof zones. Moments in foot-pounds cannot be treated as miles per hour or as wind pressures in pounds per square foot.
Can I request a Tuscany sample?
Yes. Use M&M’s Crown sample catalog to choose the exact profile and color. The listed palette is a starting point; M&M confirms physical sample availability and current product supply before arranging a request.
Sources checked October 20–21, 2026; foam comparisons checked October 21
- Crown Tuscany — Florida product page (opens in a new tab)Profile appearance, manufacturer color references and product names. Images remain Crown’s original reference assets.
- Crown Florida Signature Series brochure — May 2026 (opens in a new tab)Printed page 21: approximate dimensions, exposed size, tiles per square and nominal tile-only weights at a 3-inch headlap.
- Crown Florida technical information (opens in a new tab)One-page technical table (printed page 21), including the nominal field-tile specifications used for planning.
- Official Miami-Dade NOA 25-0127.09 (opens in a new tab)Page 1: scope, approval and expiration. Page 2: product identification and geometry. Review the complete document for installation limitations and attachment tables.
- Westlake Villa 900 — NOA 26-0602.02 (opens in a new tab)p. 6, Table 6: single-paddy AH-160 HFO1 attachment-moment entries for the Lake Wales product. Expires September 21, 2031. Checked October 21, 2026.
- ICP / APOC Polyset AH-160 — NOA 23-0614.01 (opens in a new tab)Pages 2 and 5–11: exact formulations, application minimums, contact and placement requirements. Expires May 10, 2027. Checked October 21, 2026.
- Polyglass underlayments — NOA 25-0121.12 (opens in a new tab)Page 18: the TU MAX compatibility table expressly names AH-160 (HFC), not HFO1/HFO2. Expires September 13, 2027. Checked October 21, 2026.
- Miami-Dade — Crown Building Products of Florida approval records (opens in a new tab)County applicant listing for checking approval status and replacement documents. Checked October 20, 2026.
- Tuscany evaluation for use outside the HVHZ (opens in a new tab)FL30797-R1 evaluation uses different profile terminology. This outside-HVHZ evaluation is not a substitute for Broward’s applicable approval.
- Crown currently unavailable products notice (opens in a new tab)Manufacturer-linked availability notice. The palette is not live inventory; confirm current availability with Crown or the supplier.
Product approvals are revised and renewed. Confirm the current document for the exact product, plant and roof system when your permit is prepared. This guide is general information for homeowners, not an engineering or permit determination for a specific roof.
Would Crown Tuscany suit your home?
Start with the look you want, then review the roof structure, waterproofing and attachment plan with M&M Roofing.
Call (754) 714-8445

